Pictured are some of the staff from Hanley Controls Clonmel at the recent end of summer BBQ to celebrate our Managing Director's birthday. Wishing a very Happy Birthday to Kevin Dundon from all the staff. Everyone had a great night out by all accounts and enjoyed a few drinks and fantastic food.
Series DH3 - 3 in 1 Instrument: Gage, Switch and Transmitter, Square Root Extractor for Air Flow. The SERIES DH3 Digihelic® Differential Pressure Controller is a 3-in-1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output all packed in the popular Photohelic® gage style housing. Combining these 3 features allows the reduction of several instruments with one product, saving inventory, installation time and money. The Digihelic® controller is the ideal instrument for pressure, velocity and flow applications, achieving a 1% full scale accuracy on ranges down to the extremely low 0.25" w.c. to 2.5" w.c. full scale.
The DigiMag® SERIES DM-1000
Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.
The Dwyer SERIES DM-2000
Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic®gage. A wide range of models are available factory calibrated to specific ranges.
Using solid state technology, the SERIES AT23000MR AND AT23000MRS ATEX Approved Photohelic® Switch/Gages combine the functions of a precise, highly repeatable differential pressure switch with a large easy-to-read analog pressure gage. Gage reading is unaffected by switch operation and will indicate accurately even if power is interrupted. AT23000MR series employ versatile electromechanical relays with low amperage ratings-ideal for dry circuits.
The SERIES 605 Magnehelic® Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system. The easily read dial gage is complimented by the two-wire, 4-20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter technology. The two-wire design with terminal strip on the rear simplifies connection in any 4-20 mA control loop powered by a 10-35 VDC supply.
IGD has recently launched the new TOC-625 MICRO, a multichannel gas detection system, that can be configured with up to 6 detectors and 2 relay options. With 1 click automatic setup, deploying a gas detection system has never been easier.
The system is designed with advanced automatic set-up features. Once installed, all that is required to set-up the system is one click of a button.
Addressable gas detection systems allow you to quickly deploy an effective safety solution. The controller features auto-setup functions which enable auto-configuration of the gas detection system alarm levels, gas types, and ranges.
The systems allow for the use of pre-calibrated detectors. Only a single cable is required to interconnect the controller, detectors and relay modules. Addressable gas detection systems of this type typically save up to 70% on installation costs. Furthermore, the 625 MICRO can be easily integrated into any fire system or BMS system allowing for a fast, flexible and complete safety system.
There is also a pre-wired version of the system using plug and socketed cables (TOC-625-MCP). This version allows for installation by people with no gas detection experience. Cables are available in 1m, 3m and 10m lengths which can be interconnected to make specific length cable runs.
625 MICRO is ideal for a wide variety of applications that require a small gas detection system, these can include:
New Distributor Announcement - Hanley Controls has recently been appointed as official Ace distributors for the Republic of Ireland. ACE products help to make your production processes faster, more efficient, quieter, safer and more sustainable. air springs, vibration dampers, and rubber-metal mounts.
ACE Deceleration & Vibration Technology ACE specialises in industrial shock absorbers, gas springs. ACE develop, produce and distribute solutions in the following areas:
Damping technology: industrial shock absorbers, structural dampers and damping plates.
Vibration technology: air springs, vibration dampers and rubber-metal mounts.
Gas springs: push gas springs, pull gas springs, hydraulic dampers and door dampers
New product range available from HCCL, Georg Fischer Uni-Couplings pipe connectors and repair couplings.
Welcome to the news feed of Hanley Controls Clonmel Ltd. Find out about new products, news, events, offers and more.