| Protect yourself and others with Chlorine Dioxide Disinfection is key in the global fight against COVID-19. Chlorine Dioxide (ClO2) is one of the most effective disinfectants, capable of eliminating bacteria, viruses, molds, biofilms and even spores. It‘s function as biocide, algaecide, fungicide, makes it a very powerful general disinfectant while at the same time being very gentle with the items to be disinfected. ClO2 is used in various applications, such as disinfection of drinking water, cleaning of medical instruments and personal protection equipment. ClO2 measurement ranges are e.g., in mg/L or % for solutions or mg/m³ for workplace air concentrations. In all cases the ClO2 content must be controlled and accurately monitored. This is where optek‘s sensors and converters come into play, which have been used in industrial applications for over 30 years. |  Inline chlorine dioxide measurements optek’s chlorine dioxide (ClO2) analyzers measure real time ClO2 solution strength and/or ClO2 gas concentration. Operationally, the analyzer passes a light beam through the ClO2 stream to be monitored, where light absorbance is measured at two distinct wavelengths. The measuring wavelength is set to focus on the ClO2 absorbance curve, while the secondary wavelength compensates for any influence such as: • window fouling • particulate / suspended solids • immiscible fluids • gas bubbles |
 |  |
ClO2 disinfection can be used e.g., for • Masks • Gowns • Headgears • Clothes • Instruments • Containers • Wheelchairs • Complex components • Surfaces • and much more...
What makes optek‘s chlorine dioxide analyzer systems the best choice for ClO2 monitoring?
A complete optek ClO2 analyzer is comprised of a C4422 converter, an AF26-VB sensor and a titanium or TFMC (Teflon) process connection. Together, this package offers the following advantages: • Chlorine dioxide measurements without use of consumable reagents • ClO2 measurements independent of flow rate or flow velocity • Can accommodate two independent measurement points on one C4422 transmitter • According to ATEX: Can be installed in Zone 1 (EPL, „Gb“) or in Zone 2 (EPL, „Gc“). Conform to IECEx. • According to FM: Can be installed in Class 1, Division 1 or Class 1, Division 2 areas • In the case of ClO2 gas measurements, can compensate for temperature and pressure swings • Independent monitoring of the reference wavelength, giving a real-time indication of window fouling • System comes with a NIST traceable validation adapter allowing for an online check of sensor performance • Utilizes a tungsten filament lamp ensuring long lamp life and consistent emissivity
For more information on Optek Products:
Contact Pat Walsh [email protected] or Click the image to down the Datasheet.
 |
RSS Feed